LS Chevy Engines

Concept ONE Pulley Systems fit non-VVT or VVT deleted LS series and other GM Gen III and IV engines including but not limited to LS1, LS2, LS3, LS6, LS7, LSX, L92, L99, LQ4, LQ9, LY6, L76, all Vortec 4800, Vortec 5300, Vortec 6000, and Vortec 6200

Heartbeat superchargers require LS3/L92 Heads

 

---

Heartbeat Supercharger

This kit is designed only for the specific Heartbeat supercharger listed below. Supercharger systems vary widely, so this pulley system is only compatible with the supercharger listed.

Model #02-23-62-199 - For LS3/L99 engine and has 2013-2015 Camaro 6.2L belt offset

The supercharger pulley for this kit is provided by Concept ONE. Standard pulley diameter is 3.34" with optional 3.04" and 2.83" pulleys available.

Maximum recommended boost is 10 psi.

 

---

Additional Notes

• This kit will not work with engines equipped with VVT (variable valve timing).  VVT components can be removed with VVT delete kits available from Summit Racing, Brian Tooley Racing, etc.
• LS kits will work with most cable driven, LS1, LS2, LS3 and aftermarket throttle bodies
• Thermostat part number for this waterpump is a GM #12600171 and requires seal GM #12570307 (common application: 2005-2007 Corvette 6.0L), thermostat housing kit is GM #12600172
• LS7 engines require a slightly different crank pulley configuration. Please let us know when ordering if your engine is an LS7

If you have any questions about the LS Victory Heartbeat, contact Concept One today.