All of our products are made-to-order. Please expect a 2-3 week ship time to ship your order depending on finishes, parts, backorders, shipping delays, etc.
LS Victory Whipple Application Info
LS Chevy Engines
These kits fit non-VVT or VVT deleted LS series and other GM Gen III and IV engines including but not limited to LS1, LS2, LS3, LS6, LS7, LSX, L92, L99, LQ4, LQ9, LY6, L76, all Vortec 4800, Vortec 5300, Vortec 6000, and Vortec 6200
Whipple supercharger requires LS3/L92 Heads
This kit is designed only for the specific Whipple supercharger listed below. Supercharger systems vary widely, so this pulley system is only compatible with the supercharger listed.
WK-1000 - 2010 and up Camaro 6.2L
The supercharger pulley for this kit is provided by Concept ONE. Standard pulley diameter is 3.625"
Maximum recommended boost is 10 psi.
- This kit will not work with engines equipped with VVT (variable valve timing). VVT components can be removed with VVT delete kits available from Summit Racing, Brian Tooley Racing, etc.
- LS kits will work with most cable driven, LS1, LS2, LS3 and aftermarket throttle bodies
- Thermostat part number for this waterpump is a GM #12600171 and requires seal GM #12570307, thermostat housing kit is GM #12600172
- LS7 engines require a slightly different crank pulley configuration. Please let us know when ordering if your engine is an LS7
If you have any questions about the LS Victory Whipple, contact Concept One today.